96
Menu Language
MENU m → System → Menu Language → ENTER E
Set the menu language.
―
A change to the language setting will only be applied to the onscreen menu display. It will not be
applied to other functions on your PC.
Multi Control
MENU m → System → Multi Control → ENTER E
Conguring settings for Multi Control
•
ID Setup
Assign an ID to a set. (Range: 0~99)
Press
u
or
d
to select a number, and press
E
.
•
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
•
PC Connection
Select a method to connect to MDC to receive the MDC signal.
―
DCE, DCE-M, DCE-H models are only supported.
-
RS232C cable
Communicates with the MDC via a RS232C cable.
-
RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC over Wi-Fi.
To Next Page
Loading...
Need help?
General
