22 Section 2A: Your Phone – The Basics
gold contacts. Gently press down until the battery snaps
into place.
2. Install the protective cover by lining up the tabs ata 45-degree
angle, and gently press down until the cover snaps into place.
Removing the Battery
WARNING: Do not handle a damaged or leaking Li-Ion batteryas you can
be burned.
To remove your battery:
1. Make surethe power is off so that you don’t lose any
stored numbers or messages. Remove the protective
cover by pressing the release latch and pulling up on the
back of the cover.
2. Use your thumbnail to lift and then remove the battery
as indicated in the diagram.
To Next Page
Loading...
Need help?
General
