English 104
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring: Light is measured by sampling from multiple
areas of the entire shooting screen.
Center-weighted light-measuring: Light is measured from the entire shooting
screen, but gives more importance to the
values near the center.
Spot light-measuring: You can compose the picture and capture the image
after first measuring the light only at the center spot of
the LCD monitor.
1 Display an EXPERT Mode Shooting
Setting Screen (see page 94).
2 Select the desired light-measuring
mode from the light-measuring mode
(EXP MEASURE) menu.
: Multi-section light-measuring
: Center light-measuring
: Spot light-measuring
3 Press the SET button.
h This completes the light-measuring
mode setting.
h When spot light-measuring is
selected, the light-measuring spot
mark appears in the center of
the LCD monitor.
EXP MEASURE
MULTI
Light-measuring spot mark
Camera_EN.book Page 104 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
Need help?
General
