English 82
IMAGE PROTECT MODE (PREVENT ACCIDENTAL ERASURE)
By using the image protect mode, you can prevent accidental erasure or
overwriting of the important data that you want to keep. The protect mode can
be applied to a still image, to single images of a sequential shots sequence,
to a video clip, or to an audio recording.
1 Display the data that you want to protect.
2 Display the Playback Setting Screen (see page 78).
3 Select the protect icon .
4 Press the SET button.
h “LOCK?” appears.
h If the protect mode has already been
enabled for the data, then
“UNLOCK?” appears.
5 Select “YES”, and press the SET button.
h The protect mode is set for the data.
h The protect mark indicates that the data is locked.
CAUTION
i Even if the protect mode is set for certain data files, they will be erased if
the card is reformatted (see page 151).
HINT
To select a different image in steps 4 and 5...
i Press [] or [] on the arrow button.
To cancel the protect mode for an image...
i Display the desired data and repeat steps 2 to 5. The protect mark will dis-
appear and the protect mode is canceled.
PROTECT
LOCK?
YES
EXIT
Camera_EN.book Page 82 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
Need help?
General
