English 144
POWER SAVE SETTING
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1 Display the Option Setting Mode Screen (see page 133).
2 Select the power save icon , and
press the SET button.
h The Power Save Setting Screen
appears.
BATT/CAM: Set the standby time for
the shooting modes
when the battery pack is
used.
BATT/PB: Set the standby time for
the playback modes
when the battery pack is
used.
EXT.PWR/
CAM.PB:
Set the standby time for
the shooting and play-
back modes when the AC
adapter is connected.
EXIT: Return to the Option Set-
ting Mode Screen.
OPERATION BEEP
GUIDANCE
LANGUAGE
TV SYSTEM
REFORMAT
POWER SAVE
POWER SAVE
EXT.PWR/CAM.PB
1 min
5 min
10 min
BATT/CAM
BATT/PB
EXIT
Camera_EN.book Page 144 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
Need help?
General
