English 162
DIRECT-PRINT (PictBridge PRINT)
Your digital camera supports the PictBridge function. By connecting the digital
camera directly to a PictBridge-enabled printer, the digital camera’s LCD
monitor can be used to select images and initiate printing.
Print preparations
1 Install the card containing the images you want to print in the digital
camera.
2 Use the supplied USB interface cable to connect the camera to the
printer.
3 Turn on the power to the printer.
NOTE
Do not turn off the power to the printer while it is connected.
i If the power to the printer is turned off while it is connected, the camera
may not operate correctly. If the camera does not operate correctly, discon-
nect the dedicated USB interface cable, turn off the camera, and then
reconnect the cable.
To the DIGITAL/AV terminal
To USB por t
USB interface cable
Camera_EN.book Page 162 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
Need help?
General
