English 110
EXPOSURE CORRECTION
When capturing images, you can make the image lighter or darker.
1 Set the camera to the EXPERT shoot-
ing mode (see page 94), and exit the
Shooting Setting Screen or Shooting
Information Screen (see page 113).
h Press the MENU button to exit the
Shooting Setting Screen or Shooting
Information Screen.
2 Press [] or [] on the arrow button.
h The exposure correction bar
appears.
h At this point, you can press [] or
[] on the arrow button to adjust the
exposure.
HINT
i Exposure correction setting is canceled in the following cases:
When the pointer is set to the center position.
After the shooting mode is changed.
When the BASIC mode is set.
When the selector dial is set to the other position.
After the power is turned off.
i The exposure setting numerical value is shown at the left end of the expo-
sure bar. The exposure can be set to a value from –1.8EV to +1.8EV (AE
shift sequential: the standard exposure can be set within a range of
–0.6EV to +0.6EV).
i While exposure correction is active, the accessing indicator in the view-
finder flashes green.
i You can also correct the exposure by selecting the exposure correction
icon on the Shooting Setting Screen.
Exposure correction bar
Pointer
Exposure cor-
rection setting
Darker Lighter
Camera_EN.book Page 110 Sunday, August 31, 2003 3:48 PM
To Next Page
Loading...
Need help?
General
