Commissioning the device
4.3 Parameter assignment for Comfort Panel
Comfort Panels
126 Operating Instructions, 07/2017, A5E36770603-AB
4. Enter the name of your assigned domain in the "Domain" text box.
5. Confirm your entries with "OK".
The dialog closes.
The logon data has now been set.
You use this function to set the SMTP server, sender name and e-mail account for e-mail
service.
● The Control Panel is open.
● Your system administrator has provided you with the necessary information.
Note
Additional tabs may appear in the "WinCC
Internet Settings" dialog. This depends on the
options that have been enabled for operating the local network in the project.
1. Open the "WinCC Internet Settings" dialog using the "WinCC Internet Settings" icon.
2. Change to the "Email" tab.
Setting of the SMTP server
Name of the sender and e-mail account
"Advanced" button for additional settings
3. Specify the SMTP server.
– Select the "Use the default of …" option if you want to use the SMTP server
configured in the project.
– Clear the "Use the default of …" option if you do
want to use the SMTP server
configured in the project. Enter the required SMTP server and the corresponding port.
To Next Page
Loading...
Need help?
General
