Siemens SIMATIC HMI TP1900 Comfort User Manual

Technical information
8.4 Mechanical ambient conditions
Comfort Panels
190 Operating Instructions, 07/2017, A5E36770603-AB
Emission of radio interference
The following table shows the emitted interference from electromagnetic fields according to
EN 61000-6-4, measured at a distance of 10 m.
From 30 to 230 MHz < 40 dB (μV/m) quasi-peak
From 230 to 1000 MHz
< 47 dB (μV/m) quasi-peak
See also
Notes about usage (Page 30)
8.4
Mechanical ambient conditions
8.4.1
Storage conditions
The following information is for a device that is transported and stored in its original
packaging.
The device meets the requirements according to IEC 60721-3-2 Class 2M2 with the following
amendments and limitations:
Type of condition
Permitted range
Free fall ≤ 1 m
Vibration according to IEC 60068-2-6 5 .. 8.4 Hz, deflection 3.5 mm
8.4 ... 500 Hz, acceleration 1 g
Shock according to IEC 60068-2-27
250 m/s
2
, 6 ms, 1000 shocks
8.4.2
Operating Conditions
The following information applies to a device installed according to the specifications in these
operating instructions.
The device was tested based on IEC 60721-3-3 Class 3M3 with the following amendments
and limitations:
Type of condition
Permitted range
Vibration according to IEC 60068-2-6 5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 150 Hz, acceleration 1 g
Shock according to IEC 60068-2-27
150 m/s
2
, 11 ms, 3 shocks
Shock pulses within the specified range can be transferred to the display but do not impact
the functionality of the device.

Siemens SIMATIC HMI TP1900 Comfort Specifications

General

Brand	Siemens
Model	SIMATIC HMI TP1900 Comfort
Category	Control Panel
Language	English