Siemens SIMATIC NET SCALANCE SC646-2C User Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
162 Configuration Manual, 10/2021, C79000-G8976-C475-03
• Use Interface IP
Specify whether or not the internal IP address of the device will be used.
• Value
Enter the DHCP parameter that is transferred to the DHCP client. The content
depends on the DHCP option.
Option
value
Option
name
1
Subnet mask
The subnet mask is entered
automatically.
Option cannot be deleted.
3
Router
The IPv4 address for router
in the subnet of the DHCP
client. If the device itself is
the router, the IPv4 address
of the interface is used.
You can specify several IPv4
addresses separated by commas.
6
DNS Server
The IPv4 address of the
DNS server available to the
DHCP client.
If the device itself is the
DNS server, the IPv4
address of the interface is
used.
12
Host name
Enter the host name in the
string format.
15
DNS domain
name
Assign the DNS domain
name.
66
TFTP server
The IPv4 address or the
hostname of the TFTP
server available to the DHCP
client.
Enter the address of the TFTP
server.
67
Name of the
boot file
The name of the boot file
that the client downloads
from the TFTP server.
Enter the name of the boot file in
the string format.

Siemens SIMATIC NET SCALANCE SC646-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC646-2C
Category	Switch
Language	English