Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
182 Configuration Manual, 10/2021, C79000-G8976-C475-03
Deleting an entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
4.4.10.3 DST Configuration
Configuring the daylight saving time switchover
On this page, you can configure the entries for the daylight saving time changeover. As
result of the changeover to daylight saving or standard time, the system time for the
local time zone is correctly set.
You can define a rule for the daylight saving time changeover or specify a fixed date.
Settings
Note
The content of this page depends on the selection in the "Type" box.
The boxes "DST No.", "Type" and "Name" are always shown.
• DST No.
Select the type of the entry.
• Type
Select how the daylight saving time changeover is made:
– Date
You can enter a fixed date for the daylight saving time changeover.
This setting is suitable for regions in which the daylight saving time changeover is
not governed by rules.
– Recurring
You can define a rule for the daylight saving time changeover.
This setting is suitable for regions in which the daylight saving time always begins
or ends on a certain weekday.
• Name
Enter a name for the entry.
The name can be a maximum of 16 characters long.
Settings with "Date" selected
To Next Page
Loading...
Need help?
General