Siemens SIMATIC NET SCALANCE SC646-2C User Manual

Configuring with Web Based Management
4.3 "Information" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
81
4.3.2 Versions
This WBM page shows the versions of the hardware and software of the device.
Description
Table 1 has the following columns:
• Hardware
– Basic Device
Shows the basic device
– PX.X
X.X = port in which the SFP module is inserted.
– SlotX
"X" = slot number: Module plugged into this slot.
• Name
Shows the name of the device or module.
• Revision
Shows the hardware version of the device.
• Order ID
Shows the article number of the device or described module.
• Software
– Firmware
Shows the current firmware version. If a new firmware file was downloaded and
the device has not yet restarted, the firmware version of the downloaded firmware
file is displayed here. After the next restart, the loaded firmware is activated and
used.
– Bootloader
Shows the version of the boot software stored on the device.
– Firmware_Running
Shows the firmware version currently being used on the device.
• Description
Shows the short description of the software.

Siemens SIMATIC NET SCALANCE SC646-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC646-2C
Category	Switch
Language	English