Siemens SIMATIC NET SCALANCE SC646-2C User Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
201
• OperState
Displays the current operational status. The operational status depends on the
configured "Status" and the "Link". The following options are possible:
– Up
You have configured the status "enabled" for the port and the port has a valid
connection to the network.
– Down
You have configured the status "disabled" or "Link down" for the port or the port
has no connection.
• Link
Shows the connection status to the network. With the connection status, the
following is possible:
– Up
The port has a valid link to the network, a "link integrity signal" is being received.
– Down
The link is down, for example because the connected device is turned off.
• Mode
Shows the transfer parameters of the port.
• Negotiation
Shows whether the automatic configuration is enabled or disabled.
• Flow Ctrl. Type
Shows whether flow control is enabled or disabled for the port.
• Flow Ctrl.
Shows whether or not flow control is working on this port.
• MAC Address
Shows the MAC address of the port.
• Blocked by
Shows why the port is in the "blocked" status:
– -
The port is not blocked.
– Admin down
The status "disabled" is configured for the port, see "System > Ports >
Configuration".
– Link down
The status "enabled" is configured for the port but there is no connection, see
"System > Ports > Configuration".
– Power down
The status "Link down" is configured for the port, see "System > Ports >
Configuration".

Siemens SIMATIC NET SCALANCE SC646-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC646-2C
Category	Switch
Language	English