Parameters
4.5 Inputs
SIMOCODE pro - Parameterize
194 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Analog module inputs
Description
SIMOCODE pro has an "AM1 Inputs" function block with two analog sockets, corresponding
to the two analog inputs of the analog module. The effective analog value of each input can
be read from these sockets and processed internally. An additional binary socket of the
function block represents the status of the analog measuring circuits. The analog values can
be processed internally and / or transmitted cyclically to the automation system via the
"Cyclic Send" function blocks.
Note
The "AM1 Inputs" function block can only be used if the respective analog module (AM) has
been connected and configured in the device configuration!
The following schematic shows the "AM1 Inputs" function block:
Figure 4-68 Schematic of the "AM1 Inputs" function block
To Next Page
Loading...
Need help?
General
