Siemens SIMOCODE pro Operating Manual

Parameters
4.7 Standard functions
SIMOCODE pro - Parameterize
220 Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
4.7.8
Safety-oriented tripping
Description
Note
Please note that the information made available for further processing is in the form of non
-
safety
-related signals.
Note
Please note that the safety
-related tripping function block does not itself represent a safety-
related function.
The safety function of the DM
-F Local is determined exclusively by the setting of the DIP
switch on the module.
The safety function of the DM
-F PROFIsafe is determined by the fail-safe program in the F-
CPU.
Further information: See Manual SIMOCODE pro Safety fail-safe digital modules
(http://support.automation.siemens.com/WW/view/en/50564852).
The DM-F Local Safety-related tripping function block consists of 3 sockets:
● Event - DM-F LOCAL ok: The DM-F LOCAL is ON.
● Event - safety-related tripping: A safety-related tripping has been performed.
● Status - enabling circuit closed: The enabling circuit is closed.
The DM-F PROFIsafe Safety-related tripping function block consists of 3 sockets:
● Event - PROFIsafe active: Fail-safe communication between the F-CPU and the DM-
F PROFIsafe is active.
● Event - safety-related tripping: A safety-related tripping has been performed.
● Status - enabling circuit closed: The enabling circuit is closed.
There is 1 "Safety-related tripping" function block each for SAFETY (Local) and PROFIsafe
on the SIMOCODE pro V basic unit.

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English