Siemens SIMOCODE pro Operating Manual

Parameters
4.2 Motor control
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
67
Depending on the basic unit used, you can choose from among the following control
functions:
Table 4- 8 Application selection
Control function
Short Description
Further information
Overload relay SIMOCODE pro responds like an
overload relay.
See "Overload relay" control function
(Page 72)
Direct starter (direct-on-line starter) Switching motor on and off See "Direct starter" control function
(Page 74)
Reversing starter Control of direction of rotation of motors
(forward, reverse)
See "Reversing starter" control function
(Page 76)
Molded-case circuit breaker (MCCB) Switches a circuit breaker on and off
(e.g. 3WL, 3VL)
See "Molded case circuit breaker
(MCCB)" control function (Page 79)
Star-delta starter To limit the starting current, SIMOCODE
pro initially starts a motor with a star-
connected stator winding and then
switches it to delta.
See "Star-delta starter" control function
(Page 82)
Star-delta reversing starter Star-delta starter with both directions of
rotation (forward, reverse)
See "Star delta reversing starter" control
function (Page 86)
Dahlander Control of motors with only one stator
winding in two speed steps (fast, slow)
See "Dahlander" control function
(Page 90)
Dahlander reversing starter Dahlander starter with both directions of
rotation (forward, reverse)
See "Dahlander reversing starter"
control function (Page 93)
Pole-changing starter Control of motors with two stator
windings in two speed steps (fast, slow)
See "Pole-changing starter" control
function (Page 97)
Pole-changing reversing starter Pole-changing starter with both
directions of rotation (forward, reverse)
See "Pole-changing reversing starter"
control function (Page 100)
Solenoid valve Control of a solenoid valve See "Solenoid valve" control function
(Page 104)
Positioner (1, 2, 3, 4, 5) Activation of positioners or actuators.
Versions 1 to 5
See "Positioner" control function
(Page 107)
Soft starter Control of the 3RW soft starter See "Soft starter" control function
(Page 112)
Soft starter with reversing contactor Control of the 3RW soft starter, including
an additional reversing contactor
See "Soft starter with reversing
contactor" control function (Page 115)

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English