Siemens SIMOTICS T-1FW6 User Manual

For safety reasons it is not permissible to repair the motors:
WARNING
Risk of injury when changing safety-relevant motor properties
Changing safety-relevant motor properties may result in death, serious injury and/or material
damage.
Examples of changed safety-relevant motor properties:
Damaged insulation does not protect against arcing. There is a risk of electric shock!
Damaged sealing no longer guarantees protection against shock, ingress of foreign bodies and
water, which is speci󹪝ed as IP degree of protection on the rating plate.
Diminished heat dissipation can result in the motor being prematurely shut down and in
machine downtime.
• Do not open the motor.
Note
If incorrect changes or corrective maintenance are carried out by you or a third party on the
contractual objects, then for these and the consequential damages, no claims can be made
against Siemens regarding personal injury or material damage.
Technical Support is available for any questions you might have. Contact data is provided in the
introduction.
CAUTION
Sharp edges and falling objects
Sharp edges can cause cuts and falling objects can injure feet.
• Always wear safety shoes and safety gloves!
9.2 Inspection and maintenance
Performing maintenance work on the motor
Note
It is essential that you observe the safety information provided in this documentation.
Maintenance
9.2Inspection and maintenance
1FW6 built-in torque motors
Operating Instructions, 09/2022, A5E52220812B AA 127

Siemens SIMOTICS T-1FW6 Specifications

General

Brand	Siemens
Model	SIMOTICS T-1FW6
Category	Engine
Language	English