Siemens TC35i User Manual

TC35i AT Command Set
8.7 AT^MONI
s
m obil e
TC35i_ATC_V02.07 Page 199 of 439 1/30/04
Confidential / Released
8.7 AT^MONI Monitor idle mode and dedicated mode
Syntax
Command Description
The execute command can be used to retrieve the cell parameters of the serving/dedicated cell on request.
The write command can be used to retrieve information of the serving/dedicated cell automatically every
<period> seconds. To stop the presentation type "AT" or "at".
Parameter Description
Display period in seconds
1...254
Notes
• The two header lines (see 8.7.1) are output after every ten data lines.
Test Command
AT^MONI=?
Response(s)
^MONI:(list of supported <period>s)
OK
Exec Command
AT^MONI
Response(s)
See: 8.7.1
OK
Write Command
AT^MONI=<period>
Response(s)
See: 8.7.1
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<period>
(num)

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English