Siemens TC35i User Manual

TC35i AT Command Set
8.8 AT^MONP
s
m obil e
TC35i_ATC_V02.07 Page 203 of 439 1/30/04
Confidential / Released
8.8 AT^MONP Monitor neighbour cells
Syntax
Command Description
This command can be used to obtain information of up to six neighbour cells on request.
This command can be used to retrieve information of up to six neighbour cells automatically every n seconds.
To stop the presentation type "at" or "AT".
Parameter Description
Display period in seconds
1...254
Note
• Due to the fact that not all necessary information of the neighbour cells can be decoded during a connection,
Test Command
AT^MONP=?
Response(s)
^MONP:(list of supported <period>s)
OK
Exec Command
AT^MONP
Response(s)
See: 8.8.1
OK
Write Command
AT^MONP=<period>
Response(s)
See: 8.8.1
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<period>
(num)

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English