TC35i AT Command Set
14.8 AT^SPBS
s
m
obil
e
TC35i_ATC_V02.07 Page 359 of 439 1/30/04
Confidential / Released
14.8 AT^SPBS Step through the selected phonebook alphabetically
This command can be used to scroll sequentially through the active phonebook records in alphabetical order by
name. Three entries will be displayed at a time.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
This command can be used for the ME, SM and FD phonebook.
Syntax
Command Description
Test command returns a list of supported <value>.
Every time the write command is executed, 3 rows of phone book records are returned. Each triplet overlaps with
the next one. The actual index depends on parameter
<value>. This parameter determines whether the index
will be increased or decreased.
If the index in one output line reaches the last index in the alphabetical list, the next output line will display the
first list entry.
After the last record of the phonebook has been reached (see parameter
<used> for AT^SPBG), the <inter-
nal-counter>
switches over to the first.
See examples below.
Test Command
AT^SPBS=?
Response(s)
^SPBS: (list of supported <value>)
OK
Write Command
AT^SPBS=<value>
Response(s)
^SPBS: <index-a>, <number>, <type>, <text>
^SPBS: <index-b>, <number>, <type>, <text>
^SPBS: <index-c>, <number>, <type>, <text>
OK
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
SIEMENS
To Next Page
Loading...
Need help?
General
