TC35i AT Command Set
2.12 AT+CMEE
s
m
obil
e
TC35i_ATC_V02.07 Page 47 of 439 1/30/04
Confidential / Released
Notes
• The possible error result codes are listed in 2.12.1 and 2.12.2.
• In multiplex mode (see
AT+CMUX) the setting applies only to the logical channel where selected. The setting
on the other channels may differ.
Example
To obtain enhanced error messages it is recommended to choose <n>=2.
2.12.1 Summary of CME ERRORS related to GSM 07.07
AT+CMEE=2
OK
Code of <err> Text (if AT+CMEE=2)
0 phone failure
1 no connection to phone
2 phone-adapter link reserved
3 Operation not allowed
4 Operation not supported
5 PH-SIM PIN required
6 PH-FSIM PIN required
7 PH-FSIM PUK required
10 SIM not inserted
11 SIM PIN required
12 SIM PUK required
13 SIM failure
14 SIM busy
15 SIM wrong
16 Incorrect password
17 SIM PIN2 required
18 SIM PUK2 required
20 Memory full
21 invalid index
22 not found
23 Memory failure
24 text string too long
25 invalid characters in text string
26 dial string too long
To Next Page
Loading...
Need help?
General
