Siemens TC35i User Manual

TC35i AT Command Set
15.5 AT+CMUT
s
m obil e
TC35i_ATC_V02.07 Page 369 of 439 1/30/04
Confidential / Released
15.5 AT+CMUT Mute control
Syntax
Command Description
This command can be used in all audio modes (1 to 6) and during a voice call only. See AT^SNFS for more details
on the various audio modes. As alternative, you can use the
AT^SNFM command. During an active call, users
should be aware that when they switch back and forth between different audio modes (for example handsfree
on/off) the value of
<mute> does not change, i.e. the microphone mode is retained until explicitly changed.
Parameter Description
0
(P)
mute off
1 mute on
Test Command
AT+CMUT=?
Response(s)
+CMUT: (list of supported<mute>s)
OK
Read Command
AT+CMUT?
Response(s)
+CMUT: <mute>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CMUT=<mute>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
GSM 07.07
<mute>
(num)

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English