Siemens TC35i User Manual

TC35i AT Command Set
10.9 AT+FDCC
s
m obil e
TC35i_ATC_V02.07 Page 254 of 439 1/30/04
Confidential / Released
10.9 AT+FDCC Query or set capabilities
Syntax
Command Description
This command allows the connected application to sense and constrain the capabilities of the facsimile DCE
(=ME), from the choices defined in CCITT T.30 Table 2.
Notes
• For further information see AT+FDIS.
• Used for Fax Class 2 only
Test Command
AT+FDCC=?
Response(s)
(list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of <df>s), (list of <ec>s), (list of <bf>s),
(list of
<st>s)
OK
Read Command
AT+FDCC?
Response(s)
<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
OK
Write Command
AT+FDCC=<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
EIA PN-2388

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English