Siemens TC35i User Manual

TC35i AT Command Set
9.6 AT+CCFC
s
m obil e
TC35i_ATC_V02.07 Page 222 of 439 1/30/04
Confidential / Released
9.6 AT+CCFC Call forwarding number and conditions control
Syntax
Command Description
The Test command returns the supported parameters.
The write command controls the call forwarding supplementary service. Registration, erasure, activation, deac-
tivation and status query are supported.
Parameter Description
reason for call forwarding
0 unconditional
1 mobile busy
2 no reply
Test Command
AT+CCFC=?
Response(s)
+CCFC:(list/range of supported <reason>s)
OK
Write Command
AT+CCFC=<reason>, <mode> [, <number>[, <type>[, <class>[, <time>]]]]
Response(s)
if <mode> is not equal 2 and command successful:
OK
if <mode>= 2, <reason> is not equal 2 and command successful:
+CCFC: <status>, <class> [, <number>, <type>]
OK
if <mode>= 2, <reason>= 2 and command successful:
+CCFC: <status>, <class> [, <number>, <type>, <time>]
OK
If error is related to ME functionality
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.07, GSM 02.04, GSM 02.82,
GSM 03.82, GSM 04.82
<reason>
(num)

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English