EasyManuals Logo

Singer S010L User Manual

Singer S010L
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22 GB/IE
If the lower looper thread is visible on the reverse side of the material, then
set the dial for the lower looper thread tension (yellow) to a higher
value or
set the dial for the upper looper thread tension (orange) to a lower
value.
If the tension of the left needle is too loose, then
set the dial for the left needle thread tension (blue) to a higher value.
If the tension of the right needle is too loose, then
set the dial for the right needle thread tension (green) to a higher
value.
Right side Right side
Left sideLeft side
Upper looper
thread
Upper looper
thread
Upper looper
thread
Upper looper
thread
Right
needle thread
Right
needle thread
Right
needle thread
Right
needle thread
Lower looper
thread
Lower looper
thread
Lower looper
thread
Lower looper
thread
Right side Right side
Left sideLeft side
Left
needle thread
Left
needle thread
Left
needle thread
Left
needle thread
Sewing rolled hems
Your machine will sew four different styles of rolled hems.
When sewing rolled hems, the edge of the work piece is turned over and
covered with an overlock seam.
Lightweight fabrics such as cambric, chiffon, organza, etc. are best
suited.
Rolled hems are not suitable for heavy or stiff fabrics.
Preparing the machine
Remove the left needle.
Set the seam width finger switch to R.
Align the left side of the support plate for
the seam width finger to the R marking on
the throat plate by turning the seam width
button.
Set the stitch length dial to „F-2“ so the
machine will sew a fine seam.
Needle: SINGER cat. no. 2022 size
80/11 or 90/14.
Thread: a variety of thread combinations
can be used for rolled hems.
Note: using a bulky nylon thread as the
right looper thread and regular overlock
thread for the needle thread will create a beautiful 2-thread rolled hem
2-Thread overlock seam
Needle position
Seam width head S
Stitch length F–2
Use converter
Needle thread
Top side Underside
Left
looper thread
Correct tension setting
Set each tension dial to the following setting and sew a sample seam
using a fabric scrap.
Right looper
thread
Thread tension
blue green orange yellow
Polyester 3.0 Converter 2.0
Bulky nylon thread 3.0 Converter 2.0
2-Thread rolled hem, standard
Needle position
Seam width head S
Stitch length F–2
Use converter
Left
looper thread
Top side Underside
Needle thread
347907_BE 22 24-Apr-2020

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Singer S010L and is the answer not in the manual?

Singer S010L Specifications

General IconGeneral
BrandSinger
ModelS010L
CategorySewing Machine
LanguageEnglish

Related product manuals