EasyManuals Logo

Singer S010L User Manual

Singer S010L
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23 GB/IE
Correct tension setting
Set each tension dial to the following setting and sew a sample seam
using a fabric scrap.
Note: use bulky thread as the upper looper thread and regular over-
lock thread for the needle and the lower looper to create a beautiful
rolled hem.
Right looper
thread
Thread tension
blue green orange yellow
Bulky nylon thread 2.0 Converter 4.0
3-Thread rolled hem, standard
Needle position
Seam width finger switch R
Stitch length R–2
Needle thread
Right side Left side
Lower looper
thread
Upper looper
thread
Correct adjustment
Set the adjustment dials for the thread tensions to the following values
and sew a sample seam on the material you will be sewing.
Upper looper
thread
Thread tension
blue green orange yellow
Polyester 3.0 5.0 3.0
Bulky thread 3.0 3.5 3.5
3-Thread upper looper overlock rolled hem
Needle position
Seam width finger switch R
Stitch length R–2
Needle thread
Right side Left side
Lower looper
thread
Upper looper
thread
Correct adjustment
Set the adjustment dials for the thread tensions to the following values
and sew a sample seam on the material you will be sewing.
Upper looper
thread
Thread tension
blue green orange yellow
Polyester 2.0 5.0 7.0
Bulky thread 2.0 2.0 5.0
Additional information about rolled hems
Hold the thread chain tight when you start sewing to prevent it from
rolling into the seam.
Slightly tauten the material toward the sewing direction – this will make
the seam alignment finer.
The minimum width for sewing an overlock seam is about 1.5 mm, since
the cutting width cannot be set to less than 3.5 mm.
Securing the rolled hem thread chain
Apply a small drop of fabric glue to the
end of the seam and allow to dry. Then
cut the thread chain close to the end of
the work piece.
Note: check the fabric glue for colour
fastness before use.
Seam variations and sewing techniques
Decorative flatlock seams
Set the thread tension for a 3-thread
overlock stitch, sew the seam, then pull
the work piece open to smooth the seam.
The flatlock seam can be used as a
decorative utility seam or as a purely
decorative seam.
347907_BE 23 24-Apr-2020

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Singer S010L and is the answer not in the manual?

Singer S010L Specifications

General IconGeneral
BrandSinger
ModelS010L
CategorySewing Machine
LanguageEnglish

Related product manuals