Smartgen APC715 User Manual

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 33 of 62
No.
Items
Parameter
Default
Description
value can be set.
6
Low Warn
(0-9000)%
20
Warn when external sensor value is
lower than this value. The delay
value, “warn enable” and return
value can be set.
7
Custom
Curve
Users should set the corresponding
curve when select resistor curve
type or current curve type.
8
Rated Outlet
Pressure
(0-9000)kPa
1000
Set the outlet port’s rated working
pressure of pump unit.
9
Static
Pressure
(0-9000)kPa
0
Set the outlet port’s static pressure
of pump unit.
10
Flow
Function
(0-1)
0
0: Disable；1: Enable
11
Rated Flow
(0-10000)m³/h
1000
Pump unit’s rated working pressure.
12
Over Flow
Warn
(0-1000)%
110
During normal running process, it
will initiated a warning alarm signal
when flow value has exceed the set
value. The delay value, “warn
enable” and return value can be set.
13
Over Flow
Shut
(0-1000)%
120
During normal running process, it
will initiate a shutdown alarm signal
when flow value has exceeded the
set value. The “warn enable” and
delay value can be set.
14
Flow Curve
Different outlet pressures
correspond to different flow value.
Flexible Input Ports
Flexible Input Port 1
1
Contents
Setting
(0-53)
28
Remote start (on load). See form 3.
2
Active Type
(0-1)
0
0: Closed to active 1: Open to
active
Flexible Input Port 2
1
Contents
Setting
(0-53)
26
High temperature shutdown.
See form 3.
2
Active Type
(0-1)
0
0: Closed to active 1: Open to
active
Flexible Input Port 3
1
Contents
Setting
(0-53)
27
Low oil pressure shutdown.
See form 3.
2
Active Type
(0-1)
0
0: Closed to active 1: Open to
active

Smartgen APC715 Specifications

General

Brand	Smartgen
Model	APC715
Category	Control Unit
Language	English