Usingthe (VCR
SET)menu-HiFiSOUND/AUDiO
MIX
You can select items lisled below on the VCR
SET menu. To select these items, see
"Changing fl_emenu settings" (p. 43).
The default settings are marked with t> The
indicators in parenlheses appear when fl_e
setting is selected. The seltings you can adjust
vary depending on the power mode of your
camcorder, fbe screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
You can select how to play back audio recorded on a tape in stereo mode.
_>STEREO Select to play back a stereo t_pe or dual sound track tape with m_in
and sub sound.
1 Select to play back a stereo tape with the ]ef_ channel sound or a dual
sound track tape with main sound.
2 Select to play back a slereo tape with the right channel sound or a dual
sound track tape with sub sound.
Notes
• YOU can play back a dual sound track cassette on this camcorder. However, you cannot
record a dual sound Pack on this camcorder.
• The setting returns to [STEREO] when you disconnect the power source from your
camcorder fbr more fllan 5 minutes.
You can adjust the audio balance between the originally recorded sound ([STI])
and sound added afterwards ([ST2]) on fl_e tape (p. 70).
Notes
• You cannot adjusl sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder tBr more than 5 minutes.
50 Customizing Your Camcorder
To Next Page
Loading...
Need help?
General