Step2: Chargingthe batterypack
You can charge the battery after attaching the
"InfoLITHIUM" battery pack (P series)
(p.95) to your camcorder.
• Youcannot use an NP-FP30 battery pack with
your camcorder. (See tilereverse side of the
baucWpack lot the modelnumber.)lnslalling the
balte W pack with excess torte may lead 1o
calllcorder [nall/inctk)n such as delerioralk)n ill
halle W pack perlormance or diflicully ill
removing lhe baltery pack.
POWER switch
CHG lamp
DC N ack //
.................1
__' _ Battery
pack
Power cord
AC Adaptor
To the wall outlet
4
/ Slide the battery pack in the
direction of the arrow until it clicks.
et
/ Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3 Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover to connect the AC
Adaptor.
Jack cover
Face down the
• markto match
the • mark of
the camcorder.
4 Connect the power cord to the AC
Adaptor and the wall outlet.
The CHG (charge) lamp lights up and
charging slarls.
_O
16
To Next Page
Loading...
Need help?
General