Step3: Turningthe poweron, andholdingyour
camcorder
To record, slide the POWER switch to turn
oil tile respective lamp.
When using it for the first time. the [CLOCK
SET] screen appears (p.22).
• After you have set the date and time ([CLOCK
SET], p.22h the next time you ltlrn on the power
of your camcorder, lhe current date and time will
be displayed on the LCD screen lot a lbw seconds.
POWER switch
2 Hold your camcorder correctly.
E
4
/ Turn on the power by sliding the
POWER switch in the direction of
the arrow while pressing the green
button in the center.
When you record, switch the power mode
by sliding the POWER switch in the
direction of the arrow until the respective
lamp lights up.
button
3 Ensurea good grip, then fasten the
belt.
(Movie): To record movies
(Still): To record still images
[_] (PLAY/EDIT): To play back images on
your camcorder, or to edil/delete them
_CCESS
• When you set the POWER switch to _ (Movie)
or _ (Still), lhe lens cover opens up,
Toturn offthe power
Slide the POWERswilch to OFF (CHG).
• At the time of purchase, the power will be set to
t Ilrll ol | illlt_)ll lilt iC_llly il yOIl le_lve yollr ca ii lcorder
without any operation lor approximately five
minutes. 1osave ballery power. ([A.SHUT OFF].
p.64).
19
To Next Page
Loading...
Need help?
General