Step7: Selectingtheaspectratio(16:9or4:3)of
the recordingimage
By recording in tile 16:9 (wide) mode, you
can ettjoy wide-angle, high-resolution
images.
• If you intend to view images on a wide TV,
rccoMing in the 16:9 (wide) mode is
rcconni/ended.
POWER switch
• You cannot change lhe aspect ratio in tile
lollowing cases:
while recording movies
when [D. EFFECT] is sel to [OLD
MOVIE] (p.581
• Dillerenccs in the angle of view between
16:9(wide) and 4:3 vary depending on lhe
zoonl positioll.
WIDE SELECT
Toplay backimages after connecting
your camcorderto a TV
Set [TVTYPE] to [16:9]or 14:3] according
to your TV (16:914:3)(p.42).
• When viewing 16:9 (wide) images with [TV
TYPE] set to 14:31, images may appear rough
depending on subjects.
E
1 Slide the POWER switch in the
direction of the arrow to light up
the _ (Movie) lamp.
1 Slidethe POWER switch to light up
the U_ (Still) lamp.
The image size ratio changes to 4:3.
2 Press WIDE SELECT repeatedly to
select the desired setting.
2 Press WIDE SELECT repeatedly to
select the desired screen aspect
ratio.
16:9 (wide)* 4:3*
• Still image size is set to [1_ 2.3M1 (_2.2.3M)
when 16:9 (wide) is selected. [3.0MI (3[7..0M)is
set in maxinmn_ mode when 4:3 is selected,
• The number of rccordable still images is 9,999.
* When viewing onthe LCD screen, The image
may look dill_2renl ill tile viewfinder,
23
To Next Page
Loading...
Need help?
General