Sony HXCU-100 Service Manual

2-10 (E)
HXCU-100
Extending the SY-364 Board
1. Disconnect the fl exible card wire from the
connector CN1 on the SY-364 board.
(Refer to Section 5-5-13.)
n
Be careful not to bend the fl exible card wire.
This shortens the wire life.
2. Draw the SY-364 board out of the chassis.
3. Connect the extended board EX-1098 to the
MB-1124 board.
4. Connect the SY-364 board to the EX-1098
board.
5. Disconnect the fl exible card wire from the
connector CN3 on the AU-321 board.
(Refer to Section 5-5-1.)
n
Be careful not to bend the fl exible card wire.
This shortens the wire life.
6. Connect the connector CN1 on the SY-364
board to the connector CN3 on the AU-321
board using the fl exible card wire supplied
with the EX-1098 board.
SY-364 board
CN1
Extended board EX-1098
AU-321 board
CN3
Flexible card wire
(Supplied)
MB-1124 board

Sony HXCU-100 Specifications

General

Brand	Sony
Model	HXCU-100
Category	Control Unit
Language	English