3 (E)
HXCU-100
Manual Structure
Purpose of this manual
This manual is the service manual for HD Camera Control Unit HXCU-100 and
Front Control Panel HKCU-FP1.
This manual describes the information items that premise the service based on the
components parts such as main parts replacement, electrical alignment, schematic
diagrams, board layouts and detailed parts list assuming use of system and service
engineers.
Related manuals
Besides this service manual the following manual is available for this unit.
. HXCU-100 Operating Instructions (Supplied with HXCU-100)
This manual is necessary for application and operation of HXCU-100.
Part number: 4-140-418-0X (Japanese)
Part number: 4-140-418-1X (English)
. HXCU-100 Operating Instructions CD-ROM (Supplied with HXCU-100)
This manual is necessary for application and operation of HXCU-100.
The CD-ROM contains the English, French, German, Italian, and Spanish operating
instructions (PDF).
Part number: 4-140-420-0X
. “Semiconductor Pin Assignments” CD-ROM (Available on request)
This “Semiconductor Pin Assignments” CD-ROM allows you to search for semi-
conductors used in Broadcast and Professional equipment.
This manual contains a complete list of semiconductors and their ID Nos., and thus
should be used together with the CD-ROM.
Part number: 9-968-546-06
Trademarks
Trademarks and registered trademarks used in this manual are follows.
. FRAM is a registered trademark of Ramtron International Corporation.
To Next Page
Loading...
Need help?
General
