106
Creating a standard definition image quality
(SD) disc with a recorder, etc.
You can copy images on your camcorder
onto a disc or video cassette, by connecting
your camcorder to a disc recorder with the
A/V connecting cable. Refer also to the
instruction manuals supplied with the
devices to be connected.
b Notes
• High definition image quality (HD) movies will
be copied with standard definition image quality
(SD).
1 Connect the AC Adaptor and the
power cord (mains lead) to the DC
IN jack of your camcorder and the
wall outlet (wall socket) (p. 20).
2 Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
3 Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable (supplied).
Connect your camcorder to the input
jacks of the recording device.
4 Start playback on your
camcorder, and record it on the
recording device.
For details, refer to the instruction
manuals supplied with the device to be
connected.
5 When copy is finished, stop the
recording device, and then your
camcorder.
b Notes
• Since copying is performed via analog data
transfer, the image quality may deteriorate.
• You cannot copy images to recorders connected
with an HDMI cable.
• When you do not want to display the counter,
etc. on the screen of the recording device, press
the MENU button, and select (DISPLAY
SET) t [DISPLAY OUTPUT] t [LCD
PANEL].
• To copy date/time information and camera data,
press the DATA CODE button and make a
desired setting. In addition, press the MENU
button, select (DISPLAY SET) t
[DISPLAY OUTPUT] t [ALL OUTPUT].
• When the screen size of display devices (TV,
etc.) is 4:3, set [DOWN CONVERT TYPE]
(p. 93).
• When you connect a monaural device, connect
the yellow plug of the A/V connecting cable to
the video input jack, and the white (left channel)
or the red (right channel) plug to the audio input
jack on the device.
VIDEO
AUDIO
(Yellow)
(White)
(Red)