96
You can display a zebra pattern as a guide
for adjusting brightness.
x ON/OFF
B OFF
Does not display the zebra pattern.
ON ( and the brightness level)
The zebra pattern is not recorded with the
image.
x LEVEL
You can select the brightness level.
B70 to 100 or 100+
z Tips
• The zebra pattern is a stripe pattern that appears
in areas of brightness equal to or exceeding the
brightness level you have set.
• You can assign [ON/OFF] to an ASSIGN button
(p. 64).
x ON/OFF
B OFF
Does not display the peaking.
ON ( )
You can display an image on the LCD
screen with its outlines enhanced. This
function helps you to adjust the focus.
x COLOR
You can select peaking color.
BWHITE, RED, YELLOW
x LEVEL
You can select a peaking sensitivity.
HIGH, BMIDDLE, LOW
b Notes
• The enhanced outlines will not be recorded on
the recording media.
z Tips
• You can focus more easily using this function in
combination with the expanded focus function
(p. 38).
• You can assign [ON/OFF] to an ASSIGN button
(p. 64).
x ON/OFF
B OFF
Does not display markers.
ON
Displays markers. Markers are not
recorded on the recording media.
x CENTER
B ON
Displays a marker at the center of the
LCD screen
.
OFF
Does not display a center maker.
x ASPECT
B OFF
Does not display the aspect ratio.
4:3, 13:9, 14:9, 15:9, 1.66:1, 1.85:1,
2.35:1
Displays markers at boundaries of display
area defined by the aspect ratio.
x SAFETY ZONE
B OFF
Does not display the safety zone.
80%, 90%
If you select either one, you can display
markers at boundaries of display area that
regular home TVs can display.
ZEBRA
PEAKING
MARKER
Press the MENU button t select (DISPLAY SET) with the SEL/PUSH EXEC dial.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
