Sony STR-DH590 Help Guide

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
No 4K content appears on the TV screen.
Depending on the TV or the video device, 4K content may not be displayed. Check the video capability and settings
of your TV and video device.
Be sure to use a High Speed HDMI Cable with Ethernet. When you use high bandwidth video formats such as
4K/60p 4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit, a Premium High Speed HDMI Cable with Ethernet, which can support
bandwidth up to 18 Gbps, is required.
If your TV has similar menu for high bandwidth video format, check the setting on the TV menu when you set “SIG.
FMT.” to “ENHANCED” on this receiver (refer to the Operating Instructions). For details on the setting of the TV
menu, refer to the operating instructions of the TV.
Be sure to connect the receiver to an HDMI input jack of a TV or video device that supports 4K. You have to connect
an HDMI cable to an HDMI jack that supports HDCP 2.2 when you use a playback device for 4K resolution video
content, etc.
4-731-210-11(1) Copyright 2018 Sony Corporation
103

Sony STR-DH590 Specifications

General

Receiver type	Surround
Output impedance	6 - 16 Ω
Audio output channels	5.2 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	4
Digital audio optical in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	-
Bluetooth	Yes
Ethernet LAN	No
Supported radio bands	FM
Preset stations quantity	30
HDCP version	2.2
Product color	Black
Audio decoders	DSD, DTS 96/24, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Dual Mono
Consumer Electronics Control (CEC)	BRAVIA Sync
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	297 mm
Width	430 mm
Height	133 mm
Weight	7100 g