Front speakers crossover frequency “FRT CRS.” (*3)
Center speaker crossover frequency “CNT CRS.” (*3)
Surround speakers crossover frequency “SUR CRS.” (*3)
Input settings “<INPUT>”
Input mode “IN MODE”
Naming inputs “NAME IN”
Digital audio input assignment “A. ASSIGN”
Surround settings “<SURR>”
HD-D.C.S. effect type “EFFECT” (*4)
EQ settings “<EQ>”
The settings below are explained using menus displayed on the TV screen.
Refer to “Adjusting the equalizer.”
Front speakers bass level “BASS”
Front speakers treble level “TREBLE”
Tuner settings “<TUNER>”
FM station receiving mode “FM MODE”
This setting is explained using menus displayed on the TV screen.
Refer to “Setting the FM station receiving mode [FM Mode].”
Naming preset stations “NAME IN”
This setting is explained using menus displayed on the TV screen.
Refer to “Naming preset stations [Name In].”
Audio settings “<AUDIO>”
Night Mode “NIGHT M.”
This setting is explained using menus displayed on the TV screen.
Refer to “Enjoying clear sound at a low volume level [Night Mode].”
Synchronizes audio with video output “A/V SYNC”
Digital broadcast language selection “DUAL”
Dynamic range compressor “D. RANGE”
HDMI settings “<HDMI>”
Control for HDMI “CTRL.HDMI”
Standby Linked to TV “STBY.LINK”
Standby Through “STBY.THRU”
HDMI Audio Out “AUDIO.OUT”
HDMI Sound Field Sync “S.F. SYNC”
HDMI Subwoofer Level “SW LVL”
HDMI Signal Format “SIG. FMT.”
For details on the HDMI Signal Format, refer to the Operating Instructions.
BLUETOOTH settings “<BT>”
BLUETOOTH Standby mode “BT STBY” (*5)
BLUETOOTH AAC “BT AAC”
BLUETOOTH Power “BT POWER”
System settings “<SYSTEM>”
Auto standby mode “AUTO.STBY”
Sleep timer “SLEEP”
USB update “UPDATE”
Version display “VER. X.XXX” (*6)
Model name display “STR-DH590”
To Next Page
Loading...
Need help?
General
Weight and Dimensions
