Sony STR-DH590 Help Guide

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
No TV sound is output from the receiver.
Check the type and connection of the HDMI cable, optical digital cable, or audio cable that is connected to the
receiver and the TV (refer to the supplied Operating Instructions).
When the receiver is connected to a TV compatible with Audio Return Channel (ARC) function, make sure the
receiver is connected to an HDMI jack compatible with the Audio Return Channel (ARC) function (refer to the
supplied Operating Instructions).
If the TV is compatible with the Audio Return Channel (ARC) function, make sure the Control for HDMI function on
the TV is turned on.
Make sure that “<HDMI>” - “CTRL.HDMI” is set to “CTRL ON” on the display panel.
Make sure that “<INPUT>” - “IN MODE” is set to “AUTO” on the display panel when the input of the receiver is set to
[TV].
Make sure the TV supports the System Audio Control function. Set the speaker setting of the TV (BRAVIA) to “Audio
System.” Refer to the operating instructions of your TV regarding how to set the TV.
If the TV does not have a System Audio Control function, press AMP MENU, then set on the display panel “<HDMI>”
- “AUDIO.OUT” to:
“TV+AMP” if you want to listen to the sound from the TV speaker and receiver.
“AMP” if you want to listen to the sound from the receiver only.
If the TV is not compatible with the Audio Return Channel (ARC) function, connect the receiver to the TV using an
optical digital cable (not supplied) or audio cable (not supplied). There will be no TV sound from the connected
speakers when the TV incompatible with the Audio Return Channel (ARC) function is connected via an HDMI
connection.
Depending on the order in which you connect the TV and the receiver, the receiver may be muted and “MUTING” is
displayed on the display panel of the receiver. If this happens, turn on the TV first, then the receiver.
Switch input of the receiver to [TV].
Increase the volume on the receiver or cancel muting.
4-731-210-11(1) Copyright 2018 Sony Corporation
88

Sony STR-DH590 Specifications

General

Receiver type	Surround
Output impedance	6 - 16 Ω
Audio output channels	5.2 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	4
Digital audio optical in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	-
Bluetooth	Yes
Ethernet LAN	No
Supported radio bands	FM
Preset stations quantity	30
HDCP version	2.2
Product color	Black
Audio decoders	DSD, DTS 96/24, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Dual Mono
Consumer Electronics Control (CEC)	BRAVIA Sync
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	297 mm
Width	430 mm
Height	133 mm
Weight	7100 g