Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
Viewing information on the display panel
The display panel provides various information on the status of the receiver, such as the sound field.
Note
Characters or marks in some languages may not be displayed.
4-731-210-11(1) Copyright 2018 Sony Corporation
Select the input for which you want to check information.
1
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will change cyclically as follows:
Input you have selected (*1) - Sound field currently applied (*2) - Volume level - Stream information (*3) - Index
name of the input (*4)
When listening to FM radio
Preset station name (*4) - Frequency and preset number (*5) - Sound field currently applied (*2) - Volume level
When playing back from a BLUETOOTH device
BLUETOOTH - BLUETOOTH device name - BLUETOOTH device address - Sound field currently applied - Volume
level
When receiving RDS broadcasts (for European and Asia-Pacific models only)
Program service name - Frequency and preset number (*5) - Sound field currently applied (*2) - Volume level
2
If “<INPUT>” - “IN MODE” is set to “ANALOG,” the function you have selected will be displayed.
*1
If the Pure Direct function is selected, “PURE” will appear instead of displaying sound fields.
*2
Stream information may not be displayed.
*3
An index name or preset station name will appear only if you have assigned one to the input or preset station. An index name or preset station
name will not appear if only blank spaces have been entered or the index name/preset station name is the same as the input name.
*4
A preset number will appear only if the frequency has been set in the preset memory.
*5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
