Sony STR-DH590 Help Guide

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
Enjoying an input source from a connected device immediately (One-Touch Play
function)
When you play content on a device (Blu-ray Disc player, PlayStation®4, etc.) connected to the receiver, the receiver and
the TV are turned on automatically, the input of the receiver is switched to the input of the device being played, and
sound is output from the speakers connected to the receiver.
Note
If “<HDMI>” - “STBY.THRU” is set to “AUTO” or “ON,” and the TV sound was output from the TV speakers the last time you
watched the TV, the receiver may not turn on automatically, and the sound and picture may be output from the TV when you play
content on the device.
Depending on the TV, the beginning part of content being played may not play correctly.
One-Touch Play function may work with devices other than ones manufactured by Sony, but operation is not guaranteed.
Related Topic
Enjoying content of a connected device without turning on the receiver “STBY.THRU”
4-731-210-11(1) Copyright 2018 Sony Corporation
44

Sony STR-DH590 Specifications

General

Receiver type	Surround
Output impedance	6 - 16 Ω
Audio output channels	5.2 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	4
Digital audio optical in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	-
Bluetooth	Yes
Ethernet LAN	No
Supported radio bands	FM
Preset stations quantity	30
HDCP version	2.2
Product color	Black
Audio decoders	DSD, DTS 96/24, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Dual Mono
Consumer Electronics Control (CEC)	BRAVIA Sync
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	297 mm
Width	430 mm
Height	133 mm
Weight	7100 g