Sony STR-DH590 Help Guide

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
The receiver does not turn on even when the TV is turned on.
Press AMP MENU, then set “<HDMI>” - “CTRL.HDMI” to “CTRL ON” on the display panel. The TV must support the
Control for HDMI function. For details, refer to the operating instructions of the TV.
Check the speaker settings of the TV. The receiver power syncs with the speaker settings of the TV. For details, refer
to the operating instructions of the TV.
If sound was output from the speakers of the TV last time, the receiver does not turn on even when the TV is turned
on.
Related Topic
Preparing to use the “BRAVIA” Sync function
4-731-210-11(1) Copyright 2018 Sony Corporation
85

Sony STR-DH590 Specifications

General

Receiver type	Surround
Output impedance	6 - 16 Ω
Audio output channels	5.2 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	4
Digital audio optical in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	-
Bluetooth	Yes
Ethernet LAN	No
Supported radio bands	FM
Preset stations quantity	30
HDCP version	2.2
Product color	Black
Audio decoders	DSD, DTS 96/24, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Dual Mono
Consumer Electronics Control (CEC)	BRAVIA Sync
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	297 mm
Width	430 mm
Height	133 mm
Weight	7100 g