Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
Listening to FM radio
You can listen to FM broadcasts through the built-in tuner. Scan the radio frequencies by the following procedure to tune
in to a station automatically. Be sure that the FM wire antenna (aerial) is connected to the receiver before performing this
operation. For details on connecting the antenna (aerial), refer to the supplied Operating Instructions.
FM screen
A: Frequency indication
Shows the frequency of the station which the tuner is receiving.
Hint
You can also use TUNING+/– on the remote control or on the receiver for tuning.
4-731-210-11(1) Copyright 2018 Sony Corporation
Select [Listen] - [FM] from the home menu.
The FM screen appears.
1
Select [Tuning –] or [Tuning +].
The frequency digits will begin to change on the FM screen. The receiver automatically scans the radio frequencies
and stops scanning whenever a station is received.
Repeat this step until you are tuned in to the desired station.
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
