Sony STR-DH590 Help Guide

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
No sound or only a very low level of sound is heard from specific speakers.
Check that the speaker settings are appropriate by using following settings:
Perform Auto Calibration in [Easy Setup] from the home menu.
Press AMP MENU, then select “<SPKR>” - “PATTERN” on the display panel.
Then check that sound is output from each speaker correctly by pressing AMP MENU and selecting “<LEVEL>” - “T.
TONE” on the display panel.
Make sure you have turned on your subwoofer.
Check the volume level of the subwoofer.
Depending on the selected sound field, sound may not be available from the subwoofer.
4-731-210-11(1) Copyright 2018 Sony Corporation
94

Sony STR-DH590 Specifications

General

Receiver type	Surround
Output impedance	6 - 16 Ω
Audio output channels	5.2 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	4
Digital audio optical in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	-
Bluetooth	Yes
Ethernet LAN	No
Supported radio bands	FM
Preset stations quantity	30
HDCP version	2.2
Product color	Black
Audio decoders	DSD, DTS 96/24, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Dual Mono
Consumer Electronics Control (CEC)	BRAVIA Sync
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	297 mm
Width	430 mm
Height	133 mm
Weight	7100 g