4b:
Connecting
the
video
components
HOIl
to
copnectyour"i
comp~n~n~~~"
:";
,
'"::C.:_.",."",,.,"- '
..
, .
Component to be connected
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
Before connecting the cords, be sure
to
disconnect the AC power cord (mains lead).
After connecting all your components,
proceed
to
"5: Connecting the antennas
(aerials)" (page 28).
Component
TV
Page
20
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to thejacks on
your components.
@
~
,.:@
L~J
,,@
".
..
" ,
Digital Analog
High quality image
DVD recorder, VCR
27
Camcorder, video game, etc.
27
DVD player/Blu-ray disc player
25
Satellite tuner/Set-top box 26
Note
Be sure to tum on the receiver when the video and
audio signals
of
a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
23
With HDMI jack
If you want to connect several
digital components, but cannot
find an unused input
See "Listening
to
digital sound from other
inputs (DIGITAL ASSIGN)" (page 89).
22
US
To Next Page
Loading...
