9
Set
the Control for HOMI function for
the connected component
to
on.
If the Control for HOMI function for the
connected component is already set
to
on,
you do not need to change the setting.
1ORepeat step 8 and 9 for other
components that you want to use the
Control for HOMI function.
For details on setting the TV and connected
components, refer
to
the operating instructions
of
the respective components.
Notes
• When you unplug the HOMI cable or change the
connection, perform the steps given in "When your
TV
is
compatible with the "Control for HOMI-
Easy Setting" function" (page 76) or "When your
TV is not compatible with the "Control for HOMI-
Easy Setting" function" (page 76).
•
You
cannot perform One-Touch Play and System
Audio Control during Control for HDMI-Easy
Setting operation.
• Before you do the Control for HOMI-Easy Setting
from the
TV,
be sure to turn on the
TV,
connected
components and receiver.
•
lf
the playback components cannot function after
you have made the settings for Control for HDMI-
Easy Setting, check the Control for HDMI setting
on your
TV.
•
If
the connected components do not support
Control for HOMI-Easy Setting, you need
to
set
the Control for HOMI function for the connected
components to on before you perform the Control
for HOM1-Easy Setting from the
TV.
Watching
a
DVD
(One-Touch
Play)
You can enjoy sound and image from the
components connected to the receiver via
HOMI connections by a simple operation.
Play back a connected component.
The receiver and the TV will switch
to
the
appropriate HOMI input automatically.
In case the receiver orland the TV is in standby
mode, they will be turned on automatically.
Watching a DVD/Blu-ray disc by
simple operation
You can also select a connected component,
such
as
a OVOlBlu-ray disc player using the
TV menu.
In
this case, the receiver and the TV
switch to the appropriate HOMI input.
Note
Depending on the TV, the start
of
the content may
not be output.
77
US
-
OJ
::tJ
~
~
en
'<
j
(')
."
(1)
Q)
-
c
..
(1)
en
To Next Page
Loading...
