Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• This function does not work when:
- ANALOG DIRECT is selected.
- signals with a sampling frequency
of
more than
48 kHz is input.
- the multi channel Linear PCM signals are
received via an HDMI
IN
jack.
• When one
of
the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to
"LARGE"
on the SYSTEM
menu. However, the sound will be output from the
subwoofer
if
- the digital input signal contains LFE signals.
- the front and surround speakers are set to
"SMALL".
- the sound field for movie
is
selected.
Tips
• You can identify the encoding format
of
DVD
software, etc., by looking at the logo on the
package.
• Sound fields with
IiI!J§J mark use DCS
technology. See "Glossary" (page 97).
To turn off the surround effect
for movie/music
Press 2CH to select "2CH ST." or press A.F.D.
repeatedly to select "A.F.D. AUTO".
60
US
Using
only
the
front
speakers
(2CH
STEREO)
In
this mode, the receiver outputs the sound
from the front left/right speakers only. There
is
no sound from the subwoofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
Press 2CH.
Note
No sound is output from the subwoofer in the 2CH
STEREO mode.
To
listen to 2 channel stereo
sources using the front left/right speakers and a
subwoofer, select "A.F.D. AUTO" (page 57).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
