• DUAL (Digital broadcast
language selection)
Lets you select the language you want to listen
to
during digital broadcast. This feature only
functions for Dolby Digital sources.
• DUAL
MIS
(Main/Sub)
Sound
of
the main language will be output
through the front left speaker and sound
of
the sub language will be output through the
front right speaker simultaneously.
• DUAL M (Main)
Sound
of
the main language will be output.
• DUAL S (Sub)
Sound
of
the sub language will be output.
• DUAL M+S (Main + Sub)
Mixed sound
of
both the main and sub
languages will be output.
•
A.V.
SYNC. (Synchronizes audio
with video output)
• A.Y.SYNC. N (No) (Delay time: 0 ms)
The audio output is not delayed.
• A.Y.SYNC. Y (Yes) (Delay time: 60 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display
is
minimized.
Notes
• This parameter is useful when you use a large LCD
or
plasma TV
or
a projector.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when
- signals with a sampling frequency
of
more than
48 kHz is input.
- the multi channel Linear
PCM
signals are
received via an
HDMIIN
jack.
- ANALOG DIRECT function is selected.
•
D.
ASSIGN
(Digital audio input assignment)
Lets you assign the digital audio input
to
other
input source. For details, see "Listening
to
digital sound from other inputs (DIGITAL
ASSIGN)" (page 89).
5UUS
Settings
for
the
HDMI
(HOMI
menu)
You
can use the HDMI menu to make various
adjustments for HOM!.
Select "6-HDMI"
in
the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 40) and
"Overview
of
the menus" (page 41).
HDMI menu parameters
• AUDIO FOR HDMI (AUdio for
HDMI)
Lets you set the audio output for HDMI from
the playback component connected to the
receiver via an HDMI connection.
• AMP
The HDMI audio signals from the playback
component is only output
to
speakers
connected
to
the receiver. Multi-channel
sound can be played back as
it
is.
Note
Audio signals are not output from the
TV's
speakers when "AUDIO FOR HDMI"
is
set to
"AMP".
• TV+AMP
The sound is output from
TV's
speaker and
the speakers connected
to
the receiver.
Notes
• The sound quality
of
the playback component
depends on the
TV's
sound quality, such as the
number
of
channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that
of
the TV, even
if
you play
back multi-channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
"AMP".
To Next Page
Loading...
Need help?
General
Weight and Dimensions
