Sony STR-DH700 - Enjoying the TV Sound from the Speakers Connected to the Receiver (System Audio Control)

Enjoying the TV sound
from the speakers
connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions
of the TV.
When System Audio Control function is
turned on, the receiver will turns on and
switches to the appropriate input
automatically.
TV sound is output from the speakers
connected to the receiver, and the volume
of
the TV is minimized simultaneously.
You can also use the System Audio Control
function as follows.
• Ifyou turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically be set to on and
the TV sound will output from the speakers
connected to the receiver. However,
if you
turn
off the receiver, the sound will output
from the TV speakers.
•
You can adjust the receiver's volume when
you adjust the TV volume.
78
US
Notes
• [f System Audio Control does not function
according to your TV setting, refer to the operating
instructions
of the TV.
• When
"CONTROL FOR HDM[" is set to "CTRL
ON", the "AUDIO FOR HDM[" settings in the
HDM[ menu will set automatically depending on
the System Audio Control settings.
• When you connect a
TV that does not have System
Audio Control function, the System Audio Control
function does not work.
• [f the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
• When you switch to an input other than HDM[ or
TV, the System Audio Control function will
automatically be set to off.