*The AM tuning scale can be changed (page 63).
Tuner
Operations
In case of poor
FM
stereo
reception
If
the
FM
stereo reception is poor and
"ST"
flashes on the display, select monaural audio
so that the sound will be less distorted.
Press
FM
MODE
repeatedly until the
"MONO"
indicator lights up on the display.
To
return to stereo mode, press FM
MODE
repeatedly until the
"MONO"
indicator on the
display does not light up.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or
AM band.
2 Press TUNING
MODE
repeatedly to select
"AUTO
T.".
3 Press TUNING + or TUNING
-.
Tuning
Into
a
station"
,<'
,"
automatrcanYi(Autom~ticr~.'
Tunlnglr
z
,;:
'
....
it.::,
..
".-j".
_t{-;'::iG~
\.
1 Press TUNER repeatedly to
select the FM or AM band.
2 Press TUNING + or TUNING
-.
Press TUNING + to scan from low to
high; press TUNING - to scan from high
to low.
The receiver stops scanning whenever a
station is received.
10
kHz*
AM
-+---11-
FM
MODE
....-j--it-
DTUNING
:n..----iI-
ENTER
100 kHz
FM
U,CA
Area code
TUNING
+/-
Numeric
buttons
You can listen to FM and
AM
broadcasts
through the built-in tuner. Before operation,
make sure you have connected the
FM
and
AM antennas (aerials) to the receiver (page
28).
Tip
The
tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 4.
Listening
to
FM/AM
radio
62
US
To Next Page
Loading...
Need help?
General
Weight and Dimensions
