6:
Preparing
the
receiver
and
the
remote
~~~Cit:rig
t"¥;
•..
(mainsle~d)
."
"E
Connect the AC power cord (mains lead)
to
a
wall outlet.
AC power cord (mains lead)
--==========
..
To the wall outlet
Performing
initial
setup"><\~
operat,on~
.
."!
'
..
'.·
..
__
.~yc
..
;,.:
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made
to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1/6
MEMORY/ENTER
1 Press
1/(9
to turn off the
receiver.
2 Hold down
1/(9
for 5 seconds.
"PUSH" and "ENTER" appears on the
display alternately.
3 Press MEMORY/ENTER.
After "CLEARING" appears on the
display for a while, "CLEARED"
appears.
All the settings you have changed or
adjusted are reset
to
the initial settings.
::::s
CC
~
I»
...
-
(1)
a.
To Next Page
Loading...
